Please contact us to purchase.
OVERVIEW
Our Explosion-Proof Lamps are constructed and tested in accordance to the strictest requirements of the industry; to fully satisfy the intentions of use in explosive gas and dust atmospheres.
Our first ever explosion-proof luminaires are built with Solid State Lighting Technology that actually surpasses the design and performance of conventional lighting systems; attaining longer service life even at high temperature conditions.
BENEFITS
- Constructed To Endure The Harshest Environmental Conditions – Hot & Cold Temperature Operations; Corrosion-Prone, Water Immersion and Dust Populated Conditions
- Low Maintenance – Very Suitable For Limited Accessibility Locations
- High Luminance Light Output – Suitable For High Level Mounting Installations
- 24/7 Constant Non-Stop Illumination For Continuous Critical Operations
- 50,000-Hour ( Minimum ) Total Product Service Life
- Low Energy Consumption – Up To 5 Times Less Than Incandescent Lighting
- Instantaneous Start-Up – Compared to HID
- Optional Colour Temperature – From Warm White to Cool White
- Reduced Carbon Footprint
- Mercury-Free Materials
- Effective Heat Dissipation – Contributing Further To The Already Achieved Longest Product Life Cycle
- Supplement Anti-Glare Glass Cover – For Total Light Efficiency
- Product Performance Evaluation – Tested Beyond 2 Million Cycles of “Off and On” Switching Operation
- Consistent Quality and Cost-Effectiveness
- Customization At Its Best
PROTECTION CLASSES
UL Listed US
- Class 1 , Division 1 , Groups B, C and D
- Class 2 , Division 1 , Groups E, F and G
- UL 844 , Luminaires For Use In Hazardous ( Classified ) Locations
- CSA C22.2 No. 137-M1981, Electric Luminaires For Use In Hazardous Locations
Standard(s) For Safety
- UL 60079-0, Explosive Atmospheres - Part 0 : Equipment - General Requirements, 6th Edition
- UL 60079-1, Explosive Atmospheres - Part 1 : Equipment Protection By Frameproof Enclosures "d" 6th Edition
- ISA 60079-31, Explosive Atmospheres - Part 31 : Equipment Dust Ignition Protection By Enclosure “t”, 1.1st Edition
- CSA C22.2 60079-0 : 11, Explosive Atmospheres - Part 0 : General Requirements, 2nd Edition
- CSA 60079-1 : 11, Electrical Apparatus For Explosive Gas Atmospheres - Part 1 : Flameproof Enclosures “d”, 2nd Edition
- CSA 60079-31 : 12, Explosive Atmospheres - Part 31 : Equipment Dust Ignition Protection by Enclosure “t”, 1st Edition
IEC IECEx
- Ex d IIC T5 Gb
- Ex tb IIIC T95°C Db
Standard(s) For Safety
- IEC 60079-0 : 2011 - Explosive Atmospheres – Part 0 : General Requirements Edition: 6.0
- IEC 60079-1 : 2014-06 - Explosive Atmospheres – Part 1 : Equipment Protection By Frameproof Enclosures “d” Edition: 7.0
- IEC 60079-31 : 2013 - Explosive Atmospheres – Part 31 : Equipment Dust Ignition Protection By Enclosure “t” Edition: 2
ATEX
- II 2 G Ex d IIB + H2 T5 … T4 Gb
- II 2 D Ex tb IIIC T110°C Db
Standard(s) For Essential
Health And Safety
Requirements
- EN 60079-0 : 2012
- EN 60079-1 : 2007
- EN 60079-31 : 2009
Standards Press Of China
GB Standards
- Ex d IIB + H2 T5 … T4 Gb
- DIP A21 TA 110°C
Standard(s) For Safety
- GB 3836.1 - 2010
- GB 3836.2 - 2010
- GB 12476.1 – 2000
Samson 60 - W25
Applicable Locations:
- Oil Refinery Complexes
- Petrochemical Complex and Plants
- Combustible Vapour, Dust and Fiber Facilities
- Oil and Gas Terminals and Storages
- On-Shore and Off-Shore Exploration Sites
- Off-Shore Platforms (Oil and Natural Gas)
- Floating Storage Re-Gasification Unit (FSRU)
- Floating Liquefied Natural Gas (LNG) Vessels
- Transportation of Natural Gas
- Paint Production Facilities
Classified and Hazardous Zones:
- Class 1 , Zone 1 , AEx d IIC
- Zone 2
- Zone 21 , AEx tb IIIC
- Zone 22
- Class 1, Division 1 – Groups B, C and D
- Class 2, Division 1 – Groups E, F and G
Specifications:
- Dimmable – No
- LED Type - High Luminous Flux “AC-IN” Type LED Modules
- Lamp Beam Angle - 110° (Degrees)
- Lighting Colour Temperature - 3,000 K CCT ± 10%
- Colour Rendering Index (Ra) > Ra80
- Luminous Flux – 6,000 lm
- Luminous Efficacy – 100 lm/W
- Rated Lamp Life – 50,000 Hours
- Power of Lamp – 60 W
- Line Input Voltage – 220 Vac ~ 240 Vac
- Line Input Frequency – 50 Hz / 60 Hz
- Power Factor > 0.95
- Diameter – ø 234.0 mm
- Height – 188.7 mm
- Body Material - Aluminium Alloy
- Ingress Protection - IP67 / IP68